But when I got home and tried to initialize the USB, it only froze.Guide to the Best Wii to HDMI Converter - Nerd Techy. 0 Comments Most of the ones you can find on the market should work fine if they have USB 2 backwards compatibility.A flash drive will also work, but due to the size of a flash drive, it wont be able to store as many games.Do not format it as other types such as extFS or WBFS. 10 best mac linux usb loader alternatives for Windows, Mac, Linux, iPhone, Android and more. Mac Linux Usb Loader alternative list source: sevenbits.ioI don’t know what exactly the Etcher is doing, since I cannot read the drive anymore with the Mac, once the etcher has done the flashing.Technical information. Note: The column MBR (Master Boot Record) refers to whether or not the boot loader can be stored in the first sector of a mass storage device. The column VBR (Volume Boot Record) refers to the ability of the boot loader to be stored in the first sector of any partition on a mass storage device.If I get that done, I may be able to copy the flash onto the EFI partition.I have also tried the Mac Linux USB installer form Sevenbits, but without success. And their original programmer is gone, so they couldn’t help either.The error message I got trying nabeards instructions look similar to what I got from the Mac Linux USB installer. But at least I learned about the necessity of the EFI partition. How else could one install PureOS other than from a USB?Bootable Linux Usb Mac Usb Loader For Mac About the App. And many more programs Looking for the best ISO to USB burner for MacUsb Loader Mac And Formatted. I work on a Mac and formatted the USB on there, so we thought that it was Macs formats that were screwing with the USB.
Best Usb Loader Mac Linux UsbCurrently there are limitations in Linux and X.org which need addressing (their video drivers need BIOS to initial video hardware for acceleration), but longer-term this should be an acceptable solution. For partitioning Intel Macs, see ?IntelMac/Partitioning.On an Intel Mac, currently the best stable ( lenny) configuration is:Chain loading by first loading rEFIt (in EFI), then using the BIOS version of GRUB 2 ( grub-pc) to load Linux (or Windows).This allows multi-booting to Linux, Mac OS X, and Windows, yields accelerated graphics, and does not require LILO to be run every time a kernel or init ramdisk change occurs.A single stage boot, with the EFI version of GRUB 2 ( grub-efi).This is similar to rEFIt + GRUB 2 (BIOS version), but somewhat simpler. Best practice on ?IntelMacs has been changing with improved development of GRUB and supporting software.This page only covers changing boot loaders, and does not cover the far more dangerous process of partitioning. This page covers Intel-based Macs – all models since 2006, including MacBooks and ?MacBook ProsThe most delicate part of installing operating systems, other than drive partitioning (which can destroy data), is configuring the boot loader, which can render your system unbootable. Office deployment tool for macDuring this transition you’ll want to use a GPT/MBR hybrid system, but these are potentially very painful. GRUB Legacy (prior to GRUB 2) cannot boot from EFIIn parallel with this is the transition from the BIOS system of partitioning ( MBR) to the EFI system of partitioning ( GPT). Alternatively, holding the Option key during boot should start the Apple Startup Manager, while holding the ‘C’ key during boot should boot to CD (or DVD) – these should work even if rEFIt is broken.Having a separate working computer available is wise, in case of difficulty it allows you to research the problem without needing to reboot the non-working computer.Likely worst case – assuming you do not change partitions, which can destroy data – is to render the hard drive unbootable, requiring the use of a boot CD/DVD.Booting from a CD/DVD should always work (assuming firmware is ok: you do not need to change firmware in any way to install Debian or change the boot loader), but in worst case scenario, you can always remove the hard drive, connect it to another computer (such as in a USB hard drive enclosure), and fix it there.Similarly, if the firmware is corrupt, you can restore the firmware as described at Apple support ( About the Firmware Restoration CD (Intel-based Macs)) or by taking it to an Apple store, but this should not prove necessary.This is mentioned simply to alleviate fears – if you’re only changing boot loaders, not booting from hard drive (and requiring rescue CD/DVD) is likely the worst case.Complexity in Intel Mac booting is due to the transition from BIOS firmware to the EFI system. If rEFIt is properly configured, you will be able to boot from discs or USB drives from the rEFIt screen. There is also refit, which is a re-packaging that has licensing that is conformant to Debian Free Software standards (rEFIt itself does not). These should not be necessary, but are included for reference.REFIt is an EFI bootloader, particularly for Intel Macs.REFIt can be installed via Mac OS X, which is the easiest way to use it. restore original firmware (erase settings and upgrades), in dire situationsFor details on firmware hacking. boot directly to CD (hold “C” on start up) use the built-in boot loader (hold “Option” on start up) In squeeze, gdisk is a GPT-aware fdisk, but in lenny, you’ll need to use gptsync in addition to fdisk, and gptsync is useful if you’ve used Mac OS X partitioning.There are 3 components in the boot process, as described here:REFIt (EFI bootloader) – chooses partitionIn general, once set up, you will not need to touch the firmware or rEFIt, but you can safely upgrade these without harm, and they will not touch your Linux partition.You mostly needn’t concern yourself with this, except as backup.This is sometimes upgraded, which is a reason to keep Mac OS X around see #Upgrading EFI Firmware, below. Thus rEFIt includes a program “rEFItBlesser” which blesses the Mac partition on startup, then blesses the rEFIt partition on shutdown. Blessing is done so the Mac will use rEFIt (or other EFI-capable bootloader) to boot.A sub-subtlety is that when returning from Safe Sleep, Macs will boot – which should always be the Mac partition, not rEFIt, but due to a bug they may boot into the “blessed” partition, rather than into Mac. Mac OS X is in the second partition, while rEFIt is installed in the first (EFI boot) partition (it also has files in the OS X partition, but copies these to the EFI boot partition). Concretely, grub-install /dev/sda installs GRUB 2 to the hard drive (EFI), while grub-install /dev/sda3 (note the “3”, indicating partition) installs GRUB 2 to the partition. rEFIt in EFI, multi-booting, using GRUB 2 (BIOS version) on the Linux partition to boot DebianNote the key distinction between installing GRUB 2 in EFI versus on the partition. rEFIt in EFI, multi-booting, using LILO on the Linux partition to boot Debian GRUB 2 in EFI, multi-booting, but not to Windows prior to 2008, and not providing accelerated graphics elilo (EFI LILO) in EFI, booting to Debian only You must create proper MBR/GPT hybrid. Its dialogue can be misleading if you wish to install bootloader to MBR. This is tested on amd64 and i386.Lenny install CD can install GRUB as bootloader. This is the grub-pc version which boot through rEFIt (not grub-efi). If GRUB 2 is in EFI, one can set the default OS by configuring GRUB 2.If rEFIt is in EFI, use rEFIt version 0.14+ and configure the refit.config file as documented there to select default system.You can also triple-chain: first rEFIt → GRUB 2 on the Linux partition, then GRUB 2 to another OS (such as Windows).Installing Grub2 has also been fine for Lenny. Alternatively, you can wipe the hard drive and use Debian only (or Debian and Windows, or other combinations).One can set any OS as the default, as follows:
0 Comments
Leave a Reply. |
AuthorBrandon ArchivesCategories |